Every machine that is in use is susceptible to wear and tear, or even depreciation. It affects the machine in its entirety, more so when it is in constant use. The brake cable of your electric scooter might become dysfunctional, and hence you will need to replace it. So, how to fix electric scooter brake cable repair?
Most people do not have the technical capacity and know-how about the same. It is against this backdrop that I did research on the same. I am, therefore, presenting the findings in this article. Please get yourself a copy and read through it for more information.
Do electric scooters have brakes?
Several people would ask the same question. The truth is that they have brakes. Electric scooters work with any of the following brake systems:
- Disc brakes.
- Foot brakes, or even.
- Drum brakes.
That does not mean that it requires the three brake systems to function. It only requires one of them at a time.
You can choose to install one at any given time, especially when you are servicing it. However, you replace it with the model that your scooter came with in the first instant.
If you buy one with foot brakes, do not change the brake system to that of disc or drum system. That may lead to damages to some critical parts of the scooter. It may even end up not functioning as it should be.
What are the common faults of the brake cable of an electric scooter?
In most cases, the brake cable becomes weak or even cuts off. At times, the brake pads wear out hence necessitating a total change of the brake system. It is dangerous to ride on a scooter with fault brake cable or a faulty brake system.
To be on the safe side, always carry out regular maintenance of the scooter. It will enable you to detect defects at an early stage and do the repairs and maintenance on time.
How do we fix the electric scooter brake cable?
It is not a difficult thing to do. To fix it, follow the following steps:
⇒ Inspect the entire brake system.
It includes the pad, the shoes, and the cables. Check for too much wear and do the replacement should they be out of use. Also, check the cable to see if it is thinning out, or even loosening.
When you are through, assess the extent of the damage to the surrounding parts. You will then be able to fix these parts with a lot of ease. It will not solve all the problems if you fix the brake system and leave out the other parts.
⇒ Fix the brake cable traction.
If you find out that the pad and the shoe are in perfect condition, then you should try fixing the cable. Tighten the brake adjuster that is either on the lever or on the actual brake.
Adjust to the point that the brakes become responsive. The brakes are near the rotor or the rim, and so when adjusting, make sure that it does not rub them when the brake is released.
Should you find out that the brake cable has an adjustment to the end, and then you will have no option but to fasten them in all the way. Loosen the brake cable stopper and tighten the cable. Pull the brake cable tight and tighten the stopper again.
When you are through with this, you will have one more chance to fix the cable before replacing it with an entirely new one. You can do this by unthreading the brake bridle adjuster until you achieve the appropriate tension.
⇒ Keep an eye on the braking system.
Ensure that you carry out regular maintenance of the brake system and also of the entire machine. Keep the rims polished and straight at all the time. If it is not straight, then it will cut the brake cables within a short time. It is because the brakes and the rims are in contact.
Lubricate the pivot points at all times. Friction between moveable parts will wear them out faster. It can happen without your knowledge, and hence becoming susceptible to accidents.
Make it a standard practice to carry out regular maintenance. Do not use the scooter with the worn-out cable. The cables might cut off anytime, and this may make it difficult for one to control it. Regular maintenance will enable you to identify it early and do the rectifications well in advance.
Replace any worn-out brake pads and brake shoes promptly. Worn out parts can malfunction at any moment. You will not love the experience if such a thing happens when you are in high motion!
⇒ Maintain a routine inspection program.
Make a regular timetable that you will strictly adhere to for inspections. You can make it a monthly or fortnight program. During this time, you will check on the general health of the scooter, the performance, and the wearing parts.
When you do this, you will be able to identify in advance the problems that are likely to arise. You will then rectify it when the problem is still small.
The most important thing to do is to lubricate the pivot points. It is the point where parts wear out fast.
How long can an electric scooter last?
It depends on care and maintenance. If you make it a priority to care for your machine, then it will serve you for between two to three years. It can even serve you more than that period if you replace wearable parts promptly.
On the flip side, if you handle it loosely, its useful life will be extremely short. Research shows it that a poorly maintained scooter will serve you only for between one to five months.
That sounds like it is a wastage, but it is the truth. I have talked a lot about maintenance, and there is no need to emphasize more on that.
The brake system of any machine requires regular maintenance. If you fail to do so, it will lead you to the regular fixing of the system. To fix the brake cable of an electric scooter, you will have to follow the steps explained in the article.
Pay close attention to that time when fixing a worn-out brake cable. Seek to know the time to do the replacements, and maintain a regular schedule for servicing your electric scooter.